~
Fabric requirements:
7/8 yard of Fabric A
7/8 yard of Fabric B - Fabrics should be of good contrast to one another.
~
Step 1: Cut -across the grain (see diagram 1, below)
Fabric A: 4 strips, each 7" wide (pink example)
Fabric B: 4 strips, each 7" wide (yellow example)
Diagram 1
***Before sewing, set aside one strip of each color - one A and one B. (Do not sew these yet.)
~
Step 2: Sew (see diagram 2, below)
~
Take three (3) Fabric A strips and three (3) Fabric B strips - and sew the strips together lengthwise, alternating the colors (A>B >A>B>A>B). Press seam to one side.
~
{Note the other two A & B single strips - (on the right of the page of diagram 2) - are still set aside for later.}
~
Diagram 2
Step 3: Cross Cut (see diagram 2, bottom of page)
~
Lay strip-set on cutting mat and cross-cut into five strips that are each 7" wide. (Set aside any extra yardage for another project.)
~
~
***Here's the tricky part!! This part will be deom'd at the meeting....... (see diagram 3, below)
~
Step 4a: Take three of the cross-cut patch-strips (A>B>A>B>A>B) and lay the short side of each of them to the long side of the single strip of Fabric A that was "set aside" in Step 2, above. They will lay perpendicular to each other with RST.... (right sides together)
~
Step 4b: Take the other two cross-cut patch-strips (B>A>B>A>B>A) and lay the short side of each of them to the long side of the single strip of Fabric B that was "set aside" in Step 2, above. They will also lay perpendicular to each other with RST. Sew each segment together with 1/4" seams.
Diagram 3
*** This will be demonstrated at the meeting, so don't stress over it like I did!!
~
~
Step 5: (see diagram 4, top of page)
~
Now cut the patches between the '3-strip-piece' and the '2-strip-piece'. Square up the edges. Save the extra length from Fabric A strip and the extra length from Fabric B strip for another project.
Diagram 4
Step 6: (see layout at bottom of diagram 4)
~
Lay-out Patch Strips, turning them around and alternating them to make a checkerboard pattern. Sew strips together, matching seams at the corner of each patch intersection. Finis!
Add borders according to your design plan.
~
~